It’s recommended that you use statistical software because the CMH statistic is tedious to calculate by hand; It’s not uncommon to run this test on large numbers of table (over 30 is common), so the calculations can become quite lengthy. In addition, the test is made a little more complicated by the fact that there are different versions of the test. For example, (DiMaggio, 2012) SAS has three versions, Types 1, 2 and 3:
The null hypothesis for the CMH test is that the odds ratio (OR) is equal to one. An odds ratio of exactly 1 means that exposure to property A does not affect the odds of property B. If you get a significant result in this test (i.e. if your test rejects the null hypothesis), then you can conclude there is an association between A and B.
A Cohort study, used in the medical fields and social sciences, is an observational study used to estimate how often disease or life events happen in a certain population. “Life events” might include: incidence rate, relative risk or absolute risk.
The study usually has two groups: exposed and not exposed. If the exposure is rare (for example, exposure to an industrial solvent), then the cohort is called a “special exposure cohort.” Both groups are followed to see who develops a disease and who does not. For example, you could look at cigarette smokers to see who gets breast cancer and who does not. The study would include a group of smokers, and a group of non-smokers.
Retrospective (Historical): the researcher looks at historical data for a group. Some of the people in this group have developed the disease, and some have not. This can result in finding out who has the disease and when they developed it.
Case-control nested within a cohort: a smaller group is chosen from within the cohort for a deeper look. These investigations may include genotyping, collecting tissue samples or other factors.
Case-cohort: similar to case-control nested within a cohort. The difference is that in a case-cohort study, participants are evaluated for outcome risk factors at any time before the first outcome (i.e. the first incidence of disease).
A prospective cohort study takes a group of similar people (a cohort) and studies them over time. At the time the baseline data is collected, none of the people in the study have the condition of interest. This is in contrast to a retrospective cohort study, which takes a group of people who already have the condition and then attempts to piece together the reasons why. The now famous Framingham Heart Study is one example of a prospective cohort study; the researchers have, to date, studied three generations of Framingham residents in order to understand the causes of heart disease and stroke.
Although none of the participants actually have the disease of interest in a prospective cohort study, some of the cohort are expected to develop the disease in the future. For example, a cohort of thirty-year-old people in a certain town might be studied to see who develops lung cancer. Half of the cohort might be smokers and half may not. This enables comparisons between the two groups.
One major advantage of a prospective cohort study is that researchers don’t have to tackle with the ethical issues surrounding randomized control trials (i.e. who receives a placebo and who gets the actual treatment).
A retrospective cohort study (also known as a historic study or longitudinal study) is a study where the participants already have a known disease or outcome. The study looks back into the past to try to determine why the participants have the disease or outcome and when they may have been exposed. In a retrospective cohort study the researcher:
One of the first recognized retrospective cohort studies was Lane-Claypon’s 1926 study of breast cancer risk factors, titled “A Further Report on Cancer of the Breast, With Special Reference to Its Associated Antecedent Conditions.” The study of 500 hospitalized patients and 500 controls led to the identification of most of the risk factors for breast cancer that we know today.
In a retrospective cohort study, the group of interest already has the disease/outcome. In a prospective cohort study, the group does not have the disease/outcome, although some participants usually have high risk factors.
Retrospective example: a group of 100 people with AIDS might be asked about their lifestyle choices and medical history in order to study the origins of the disease. A Second group of 100 people without AIDS are also studied and the two groups are compared.
Prospective example: a group of 100 people with high risk factors for AIDS are followed for 20 years to see if they develop the disease. A control group of 100 people who have low risk factors are also followed for comparison.
A cohort effect is the influence of a group’s life experience on the outcome of an experiment. It’s the effect of being born at the same time (i.e. GenXer vs. Baby Boomer), or in the same region (i.e. born in New Orleans vs. Seattle) or some other factor that makes the group unique. Cohorts in schools are usually defined by age group, while cohorts in organizations are defined by their date of entry into the job.
Lets say you were conducting cross sectional research (a method that compares different age groups at the same point in time) to find out how basic mathematics ability improves with age. You give the same basic math standardized test to groups of students who are 7-years-old, 14-years-old, and 21-years-old. You get the following mean results:
You might conclude that every 7 years that pass makes a difference of 24% in scores. However, what you haven’t accounted for is the cohort effect. The students differ not only in age, but they belong to different cohorts (in this case, groups of people born around the same time), some of which may have grown up when basic mathematics was strongly emphasized in schools. If the 21-year-old cohort in the above study experienced strong emphasis on basic math, it’s a possibility that they could have achieved 72% when they were 14-years old or even 7-years-old.
The problems associated with the cohort effect can be lessened by testing the same cohort over a period of time, a method called longitudinal research. In the above example, you would test a group of 7-year-olds, then test the same group every 7 years. A disadvantage to longitudinal research is that it’s costly, and dropout rates can affect the results.
Best Statistics SiteThe new functions are called an arithmetic combination of functions. The domain for the new function is all real number common to the domains of f(x) and g(x), with the exception of the quotient, where x cannot equal zero.
Solution: We aren’t given an x-value here, so in order to combine these functions, substitute every value of x in f(x) = 3x + 4 with g(x) = 2x2 – 1:
If algebra isn’t your forte, you can use your graphing calculator to get a very good approximation for a difference of two functions. For example, let’s say you wanted to find the difference at x = 2 of
Primary composite endpoints are the main measurements for a trial; They answer the most important questions in the trial. For example, if the endpoint of a study is “cure”, then a composite endpoint might be cure or remission.
Secondary composite endpoints are the secondary objectives in the trial. For example, a drug designed to cure/put into remission a disease might also have measures of whether chronic pain and quality of life are improved.
The major risk to studies with composite endpoints is bias. Studies with composite endpoints should be analyzed carefully to avoid bias because of competing risks between endpoints. For example, a study on a particular stroke medication with endpoints of death or hospitalization may see a reduction in hospitalization only because of an increase in mortality. For this reason, death should always be included in a trial that studies non-fatal events (Skali et. al).
When a study has a fairly rare endpoint, it’s common to use a composite endpoint instead. Rare events may require a very large, expensive trial in order to get statistically significant results. Let’s say a study is investigating a new drug for anaphylaxis (a severe allergic reaction which can lead to death). If “death” is the endpoint, a trial could need about a million people to record one death(1). A composite primary endpoint might be “any non-fatal or fatal allergic reaction” — which would require much smaller numbers (thousands, or possibly hundreds).
Composite endpoints should only be used when each endpoint in the composite is meaningful, both to the trial purpose and to the patient. Each endpoint should be analyzed separately to gauge if the clinical trial has meaningful results for all members of the composite, or just some (ICOH, CPMP). For example, glycoprotein IIb/IIIa inhibitors show a statistically significant reduction for the composite endpoints of death, myocardial infarction, or refractory angina. However, death — the most important endpoint — showed no change (Freemantle et. al).
N. Freemantle, M. Calvert, J. Wood, J. Eastaugh, C. Griffin, “Composite Outcomes in Randomized Trials. Greater Precision but with Greater Uncertainty?” Journal of the American Medical Association, 289, 2554–2559 (2003).
Concordant pairs and discordant pairs refer to comparing two pairs of data points to see if they “match.” The meaning is slightly different depending on if you are finding these pairs from various coefficients (like Kendall’s Tau) or if you are performing experimental studies and clinical trials.
Concordant pairs and discordant pairs are used in Kendall’s Tau, for Goodman and Kruskal’s Gamma and in Logistic Regression. They are calculated for ordinal (ordered) variables and tell you if there is agreement (or disagreement) between scores. To calculate concordance or discordance, your data must be ordered and placed into pairs.
Note that in the first column, interviewer 1’s choices have been ordered from smallest to greatest. That way, a comparison can be made between the choices for interviewer 1 and 2. With concordant or discordant pairs, you’re basically answering the question: did the judges/raters rank the pairs in the same order? You aren’t necessarily looking for the exact same rank, but rather if one job seeker was consistently ranked higher by both interviewers.
Concordant pairs: both interviewers rank both applicants in the same order — that is, they both move in the same direction. While they aren’t the same rank (i.e. both 1st or both 2nd), each pair is ordered equally higher or equally lower. Interviewer 1 ranked F as 6th and G as 7th, while interviewer 2 ranked F as 5th and G as 8th. F and G are concordant because F was consistently ranked higher than G.
Discordant pairs: Candidates E and F are discordant because the interviewers ranked in opposite directions (one said E had a higher rank than F, while the other said F ranked higher than 6).
The term “concordant pair” is sometimes used (i.e. in case control studies) to mean a pair who are both exposed (or both not exposed) to some factor. In other words, it is based on exposure status. In a matched pairs design, a concordant pair means that the exposure status of one case is the same as a control case.
A medication’s indication can act as a confounder in observational studies, especially when the drug’s effectiveness is being assessed (Ahrens & Pigeot, 2007). Indication refers to how a particular drug is used for treatment of a certain disease. For example, aspirin is an indication for cardiovascular disease.